| |
 |
“TO DO YOUR BEST WORK”
“YOU MUST USE THE BEST MATERIALS”
|
 |
|
This latest generation of engineered multi-functional, safe and Surface Tolerant Systems are used for rebuilding and protecting all types of equipment and structures, Providing excellent protection from erosion, corrosion, cavitation, wear and chemical damage.
Deliverers the best in corrosion protection, while being safe for our environment and totally user friendly.
• 100% Solids, No VOC’s, No Isocyantes
Eco-Polymers bond both mechanically and chemically to metal in excess of 3000psi. These multi-functional polymer materials incorporate the wear, and abrasion resistant properties of alumina oxide ceramic.
|
 |
|
 |
Why make your job tougher than it needs to be?
KEEP IT SIMPLE
Today with new curing agents, this hybrid NOVOLAC resin combine for ease of application, by roller, brush or spray, and is safe for the applicator and the environment. These used friendly products are formulated without solvents or VOCs and are basically odorless, so they may be applied in occupied areas.
|
 |
|
 |
The most efficient way to reduce your overall maintenance costs is standardize on the latest technology of adaptable user friendly and surface tolerant repair materials, with an easy to follows step by step safe application methods. This provides a fasted learning curve for personnel and greatly reduces unused inventory and the paper work for the safety and environmental compliance people.
Eco-polymer’s rugged ceramic filled repair / wear compounds are engineered for severe environments. They offer superior abrasion resistance and tolerate less than optimal conditions and cure in very low temperatures.
Eco-Polymers are 100% solids Novolac technologies designed for maximum heat and chemical resistance. Providing excellent coatings for pumps, valves, secondary containment, ducts, piping, vessels and storage tanks. Withstands up to 98% sulfuric acid, 100% phosphoric acid, 35% nitric acid, and 100% hydrofluoric acid, MEK, mineral acids, bleach, chlorides, potassium, and sodium.
Eco-Polymer’s specialized novolac coatings are formulated to withstand multiple, rapid temperature variations. Will withstand temperatures in excess of 400°F and provide outstanding protection for pipe wraps, leaks, scrubbers, crackers, stacks, primary and secondary containment, valves, fittings, fans blowers, compressors, ducts, chemical line, brine/slurry tanks and more.
The problems with solvents and VOC’s:
Most States and the EPA have regulations regarding the acceptable levels of there carcinogenic agents allowed in products due to health and environmental concerns. Not only are they a health hazardous substance, they are one of the primary cause of coating failures. As the solvents evaporate in to the air, and water the coating becomes thinner and holes are created in coating’s structure, causing permeability problems. This process continues long after the original curing process. The results are a failing coating system that will allow the penetration of harmful chemicals to undermine the coating and damage the structural base metal or concrete.
GETTING YOUR MONEY’S WORTH
The reason for coating and repairing concrete is to extend its service life and provide protection from erosion and corrosion damages of chemicals and wear from abrasion or impingement. The only way to reduce the price of a coating product is to use inferior resins and or fillers like solvents. The purchase price of a coating or repair material by it’s self, is a very small part of the overall cost of most project. Though, purchasing what may appear to be a bargain material at the time, that later proves to causes health problems or fails to provide the proper protection to the asset and shortens is useable life cycle, is the most costly of error. |
 |
|
 |
Let us help you simplify your equipment repair and resurfacing projects !!
Contact our applications department @ Toll Free (888) 858-3790
or Email Us
For a COMPLETE NO COST diagnosis for your project, Product Data Sheets, MSDS sheets, and Step by Step Surface Preparation Instructions.
Contact our applications department.
For a complete list of ALL of our products Click here !
|
The Novolac Epoxy Advantage:
Novolac technology is the cutting edge in epoxies.
Learn more...
- Enviromentally safe
(100% solds hybrid NOVOLAC systems, contains no solvents, no volatile or organic compounds)
- Superior Bonding
( Bonds both mechanically and chemically to concrete and metal in excess of 3000psi ASTM D 4541)
- Higher Chemical Resistance
(Due to its chemistry, this Novolac epoxy has very high chemical resistances, withstands up to 98% sulfuric acid )
- Higher Temperature
(High Temperature engineered versions are available for service temperatures exceeding 400 °F)
- Superior Abrasion Resistant
(ASTM D4060-9 testing for abrasion resistance that the incorportation of alumina oxide ceramic into the matrix provides excellent resistance to abrasion and improves chemical resitances)
- Reinforcing Kevlar™ Fibers
(The Addition of reinforcing Kevlar fibers, which are six times stronger than steel, to the epoxy matrix, tremendously increases the flexural and tensile strength by up to 5 to 6 time. This substantaially increases wear resistance and greatly reduces the possiblity fo damage from impact to crack or chip the epoxy.)
We specialize in problem solving facility and utility issues.
People that we serve:
Power Industry:
Southern California Edison, TU Electric, Reliant Energy, Basin Electric, Public Service of New Mexico, Arizona Public Services, Hoosier Energy, and Minkota Power.
Water and Waste:
Pima County Waste Water in Arizona, San Diego Waste Water in California, Los Angeles Sewer and Sanitation, Myrtle Beach Waste Water in South Carolina, Pittsburgh Pennsylvania Potable and Waste Water departments, Arlington Texas Water Department.
Semi Conductor Industry:
S.E.H., Komag, T.I., Motorola, Heraus Amerisel, Sony, LSI Logic, and Atmel
Chemical and Petrochemical Industry:
Air Products, Dow, Mobil, Marathon, Tidelands, and Chevron.
Industrial Application
All Products are:
User Friendly, Environmentally safe, solvent-free, kevlar reinforced, nuclear irradiation decontamination & DBA testing approved for level 1 nuclear applications, tested and used world wide,providing excellent resistance to hydrocarbon oils and fuels, mineral acids and alkalis.
Construction Systems Supply, Inc.
6030 California Ave SW
Suite 200
Seattle, WA 98136
Toll Free: 1(888) 858.3790
Local: (206) 938.1058
Fax: (206) 774.0370
|
|
|
