Utilities and Facilites Coatings

	We believe the formula for a successful maintenance procedure is to “KEEP IT SIMPLE”
The ability of a single product system to be effectively used on dry surfaces, underwater, or on saturated or dripping metal/concrete surfaces, while being both environmentally and user friendly, represents a technology that will greatly reduce matenance cost.

Eco-Coat Wet Dry Gel is a 100% solids, next generation, epoxy coating with excellent chemical and outstanding abrasion resistance. The abrasion resistance in enhanced with the use of Kevlar TM   micro fibers, feldspar ceramic, and maximum resin rigidity. This epoxy is highly resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics. Suitable for full time immersion. The Kevlar and ceramic also add body to the coating resulting in a one coat, high build glaze finish that will withstand severe abuse. Bonds to concrete or metals wet or dry.

Eco-Coat  Wet Dry Paste is a paste version of Eco-Coat WD with Kevlar ®reinforced thickened epoxy for high build application Mixable in temperatures down to approximately 50 - 55 degrees F. Non-hazmat to ship and can be shipped worldwide.

Eco-polymer  Quick Set is a 100% solids, next generation, non-hazmat epoxy coating system designed for repairing leaks, spalls and protection of concrete, wood and metal surfaces  subjected to constant immersion in water. It will bond to wet substrates and is especially well suited for direct application under water and is resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics.

Eco-Polymer coating SP2000R & SP2000W
Is an exceptionally chemically engineered Novolac coatings designed to withstand the harshest corrosive environments. SP-2000R is comprised of 100% solids and contains no VOC’s. Excellent adhesion properties allow SP-2000R to bond on steel, concrete and iron even when coating conditions are less than ideal. The R in SP-2000R represents the incorporation of re-cycled tire rubber. The rubber enhances the product with excellent impact resistance. Typical applications include secondary containment, wastewater tanks, lift stations, wet wells, and manholes, cooling towers, and industrial floor coating. SP2000W meets NSF/67 standards for potable water.

	Click here for a complete list of products
This versatility enables engineers and maintenance professionals to have the flexibility of a multi-functional system that may be applied over a wide range of applications. Wet or dry surfaces, even underwater.

THE HIGH COST OF DOWN TIME
When the production of a facility is reduced or shut down for either a planed or emergency outage the costs for this down time can be astounding.

In situations like this, “time is truly money”.
The advantages of our proprietary formulations & technology allow cost savings to be realized through a large reduction in the time a system is out of service. By limiting downtime and by increasing the coating life cycle our products reduce the over all life cycle cost of the municipal system maintenance & up-keep.

You don’t have to be a life time plant engineer to know that most real-life facilities repairs and coating projects are performed in some of the most adverse field conditions, with limited time restrictions and not in ideal testing laboratory environments. In many cases the object to be repaired is not exactly underwater, just water saturated or in a high-humidity environment.

This latest generation of used friendly and surface tolerant high performance industrial coatings are formulated for protecting all types of equipment and structures, concrete or metal. Providing excellent protection from erosion, corrosion, cavitation, wear, and chemical damage, these Products can extend the life of your facility and equipment. By preserving your investment, you save time and potential future cash outlays.
Safe for the applicator and the environment

GETTING YOUR MONEY’S WORTH
The reason for coating the base material of an item is to extend the service life and provide protection from erosion and corrosion damages of chemicals and wear from abrasion or impingement. The only way to cut the price of a coating product is to use inferior resins and or fillers like solvents. The purchase price of a coating or repair material by it’s self, is a very small part of the overall cost of most project. Though, purchasing what may appear to be a bargain material at the time, that later proves to causes health problems or fails to provide the proper protection to the asset and shortens is useable life cycle, is the most costly of error.

To learn more about how our complete lines of 100% solids epoxies and Moisture-cured urethane repair and coating systems can save you time and money, apply for a no cost diagnosis of the details of your project, and receive a our report “ Comparing Epoxies to Moisture-cured  Urethanes”.

Contact our applications department @ Toll Free (888) 858-3790 or Email Us

For a COMPLETE NO COST diagnosis for your project, Product Data Sheets, MSDS sheets, and  Step by Step Surface Preparation Iinstructions.

Contact our applications department.

For a complete list of ALL of our products Click here !