| |
"Simplify Your Repair and Industrial Coating Projects with Proven Practical Solutions"
Some of the most challenging environments for sealing and repair are pipelines. Often, by their very nature, pipelines are exposed to harsh chemicals and corrosive agents which may flow through with friction or possibly just sit in place, eating away at whatever coats the pipe. For these challenging situations, Construction Systems Supply and Novocoat Technology offer the EcoPolymer family of products.
Resistant to the Harshest Elements
The EcoPolymers were formulated using Kevlar® reinforcing fibers, which help form an incredibly strong bond against corrosion, erosion, wear, and chemical damage. The entire line of products was created without solvents so their tolerance to wet surfaces is exceptional. EcoCoat, the industrial coating member of the EcoPolymer family, was designed for many applications including steel, concrete, and similar surfaces.
EcoCoat is so resistant to moisture that it can be applied in the most challenging of wet environments, including underwater, since the polar bonds of the epoxy we use are strong enough to displace water. Despite their strength though, EcoPolymer products are completely environmentally friendly. Unlike many companies in the industry, CSS is determined to offer its customers industrial coatings that will in no way harm the environment or those working around them.
Before you make a commitment as important as your pipeline's coating, we recommend that you first do a field test on the product. At CSS, we encourage you to test our EcoPolymer products in situ, in its most challenging state. Just fill out our request form to let us know about your project and we'll recommend the exact custom formula for the job and give you a discounted sample--we look forward to making your work easier.
Maximum interior and exterior protection for steel, cast & concrete pipes and tanks.
Pipe and tank coatings and linings present there own unique set of challenges. Often, by their very nature, pipelines and tanks are exposed to harsh chemicals and corrosive conditions in damp and humid environments. I many cases in the past the matenance of these items would cause the facility to be shut down for long periods of time and product halted.
THE HIGH COST OF DOWN TIME
When the production of a facility is reduced or shut down for either a planed or emergency outage the costs for this down time can be astounding.
In situations like this, “time is truly money”.
WET OR DRY SURFACE EPOXIES AND MUSTURE CURED UNITHANES
This latest generation of exceptionally Moisture and Surface Tolerant coating Systems are used for rebuilding and protecting all types of equipment and structures, concrete or metal on wet or dry surfaces, even underwater. Significantly reducing product down time.
The ability of a single product system to be effectively used on dry surfaces, underwater, or on saturated or dripping metal/concrete surfaces, while being both environmentally and user friendly, represents a technology that will greatly reduce matenance cost.
Eco-Coat Wet Dry Gel is a 100% solids, next generation, multipurpose protective coating that may be applied to wet or dry surfaces, even underwater. Provides excellent chemical and outstanding abrasion resistance. The abrasion resistance in enhanced with the use of KevlarTM micro fibers, feldspar ceramic, and maximum resin rigidity. This coating is highly resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics. Suitable for full time immersion service.
Eco-Polymer coating SP2000R & SP2000W
Is an exceptionally chemically engineered Novolac coatings designed to withstand the harshest corrosive environments. SP-2000R is comprised of 100% solids and contains no VOC’s. Excellent adhesion properties allow SP-2000R to bond on steel, concrete and iron even when coating conditions are less than ideal. The R in SP-2000R represents the incorporation of re-cycled tire rubber. The rubber enhances the product with excellent impact resistance. Typical applications include secondary containment, wastewater tanks, lift stations, wet wells, and manholes, cooling towers, and industrial floor coating. SP2000W meets NSF/67 standards for potable water.
For a complete list of products (link to product guide)
Moisture-Cured Urethanes: (MCU) Advantages:
|
| Single component: |
No catalyst mixing errors or pot life concerns. |
| Application: |
Can be applied in humidity up to 99%, in low temperatures- to below freezing, and subjected to rain, fog or condensate with end 30 minutes. |
| Durability: |
Superior performance and corrosion resistance with extended service life for protective coating and maintenance projects. |
| Recoat: |
Most MCUs have no outer recoat window on a clean surface. |
| Time: |
Reduced cure times of under 30 minute ! |
By limiting downtime and by increasing the coating life cycle our products reduce the over all life cycle cost for municipal system maintenance & up-keep. High temperature industrial corrosion resistant coatings applied directly to hot steel up to 500f !!!.
To learn more about how our complete lines of 100% solids epoxies and Moisture-cured Polyurethane repair and coating systems can save you time and money, apply for a no cost diagnosis of the details of your project, and receive a our report “ Comparing Epoxies to Moisture-cured Urethanes”.
Contact our applications department @ Toll Free (888) 858-3790 or Email Us
For a COMPLETE NO COST diagnosis for your project, Product Data Sheets, MSDS sheets, and Step by Step Surface Preparation Iinstructions.
For a complete list of ALL of our products Click here !
|
The Novolac Epoxy Advantage:
Novolac technology is the cutting edge in epoxies.
Learn more...
- Enviromentally safe
(100% solds hybrid NOVOLAC systems, contains no solvents, no volatile or organic compounds)
- Superior Bonding
( Bonds both mechanically and chemically to concrete and metal in excess of 3000psi ASTM D 4541)
- Higher Chemical Resistance
(Due to its chemistry, this Novolac epoxy has very high chemical resistances, withstands up to 98% sulfuric acid )
- Higher Temperature
(High Temperature engineered versions are available for service temperatures exceeding 400 °F)
- Superior Abrasion Resistant
(ASTM D4060-9 testing for abrasion resistance that the incorportation of alumina oxide ceramic into the matrix provides excellent resistance to abrasion and improves chemical resitances)
- Reinforcing Kevlar™ Fibers
(The Addition of reinforcing Kevlar fibers, which are six times stronger than steel, to the epoxy matrix, tremendously increases the flexural and tensile strength by up to 5 to 6 time. This substantaially increases wear resistance and greatly reduces the possiblity fo damage from impact to crack or chip the epoxy.)
We specialize in problem solving facility and utility issues.
People that we serve:
Power Industry:
Southern California Edison, TU Electric, Reliant Energy, Basin Electric, Public Service of New Mexico, Arizona Public Services, Hoosier Energy, and Minkota Power.
Water and Waste:
Pima County Waste Water in Arizona, San Diego Waste Water in California, Los Angeles Sewer and Sanitation, Myrtle Beach Waste Water in South Carolina, Pittsburgh Pennsylvania Potable and Waste Water departments, Arlington Texas Water Department.
Semi Conductor Industry:
S.E.H., Komag, T.I., Motorola, Heraus Amerisel, Sony, LSI Logic, and Atmel
Chemical and Petrochemical Industry:
Air Products, Dow, Mobil, Marathon, Tidelands, and Chevron.
Industrial Application
All Products are:
User Friendly, Environmentally safe, solvent-free, kevlar reinforced, nuclear irradiation decontamination & DBA testing approved for level 1 nuclear applications, tested and used world wide,providing excellent resistance to hydrocarbon oils and fuels, mineral acids and alkalis.
Construction Systems Supply, Inc.
6030 California Ave SW
Suite 200
Seattle, WA 98136
Toll Free: 1(888) 858.3790
Local: (206) 938.1058
Fax: (206) 774.0370
|
|
|
