CSS Corp.net


Waste Water Coatings and Repair	Utilities & Facilities Coatings	Anti-Corrosion Coatings	Concrete Repair Coatings	Pipe and Tank Coatings	Equipment Coatings	Floor Coatings

For a specific application recommendation : Please Contact Us via Phone: 888-858-3790 or Email: info@csscorp.net. For Specific information about product Data Or MSDS Sheets Contact Us Directly
Eco-Polymers:
This latest generation of exceptionally Moisture and Surface Tolerant coatings and repair Systems are used for rebuilding and protecting all types of equipment and structures, concrete or metal on wet or dry surfaces, even underwater.
	Typical Applications: Wet wells Utilities and infrastructure Concrete pipe Tank coatings and liner Ductile pipe Concrete repair and protection Lift stations Basins Manholes Sewage treatment facilities Hydro-Electric Facilities
Product	Description/Typical Application	Surface Material	Application Tools	Service Temperature
Eco-Coat Wet Dry Gel Request Data sheets / MSDS Wet or dry surface application Anti-corrosive Ceramic and .Kevlar™.Reinforced	Eco-coat WD Gel is a 100% solids, solvent free, next generation, epoxy coating featuring excellent chemical and abrasion resistance, high build tile like glaze finish that will withstand severe abuse. Can be applied to surfaces above and below the water line and is suitable for use in temperatures from 65°F down to 38°F. Eco-Coat WD Gel bonds to cold concrete (wet and dry), fiberglass, steel and wood surfaces. Excellent for use in temperatures as low as 38°F. Most corrosive environments, Marine, chemical, pulp and paper. Spillways, piping, pilings, columns	concrete metal wood fiberglass	roller brush spray spreader	dry service 212 ºF immersion 150 ºF
Eco-Coat WD Paste Request Data sheets / MSDS Solvent-Free Easy 1:1 Mixing Ratio Works Underwater Kevlar TM Reinforced	Eco-Coat Paste is a 100% solids, high build, non-regulated, non-hazmat, Kevlar ™reinforced epoxy coating system designed for coating and repairing surfaces that may be subjected to constant immersion in water. Eco-Coat Paste will bond to water saturated concrete, and is resistant to sewer gasses, pool chemicals, sulfur based chemicals, dilute acids and most caustics, and most hydrocarbon solvents (diesel, mineral spirits, etc.). Chemical resistance is representative of high end Bis A epoxies USES: Swimming Pools, Marine environments, Docks, fiberglass and wood boats, Sewers, tunnels, dams, spillways, Underground concrete structures Steel and concrete piping.	concrete metal wood fiberglass	spreader
Eco-Coat Quick Set Request Data sheets / MSDS Solvent-Free Low Brittleness Easy 1:1 Mixing Ratio Kevlar TM Reinforced Fast Curing Adhesive Sealant Patching	Eco-Coat Quick Set is a 100% solids, next generation, non-hazmat epoxy coating system designed for repairing leaks, .spills. and protection of concrete, wood and steel substrates subjected to constant immersion in water. It will bond wet substrates and is especially suited for direct application underwater and is resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics. Fast set repairs, Quick curing adhesive, Emergency repairs, Leak and crack repairs underwater	concrete wood steel substrates
Eco-Crete Mortar Request Data sheets / MSDS Mix-With-Sand Concrete Repair Epoxy	Eco-Crete Mortar is a two component, 100% solids pourable epoxy. This product is recommended for repairing defects in concrete, cement or masonry products by mixing with sand to form an “epoxy mortar”. Can be used on wet or submerged surfaces. Easy 2:1 Mix Ratio. Works Underwater, Fast Setting’ Economical.
Eco-Crete fast cure Request Data sheets / MSDS Structural concrete repair	EcoCrete was formulated specifically for field repairs of damaged concrete in severe service. This unique polymer compound is designed to be applied to wet or dry concrete surfaces and incorporates Kevlar™ reinforcement to withstand severe impact. EcoCrete has a compressive strength of >15,000 PSI (ASTM D 695).	Structural Concrete repair	trowel	dry service 220 ºF immersion 150 ºF
SL-200 Request Data sheets / MSDS Man hole and sewer repairs	SL-200 is a two component thermo set. Which is designed to provide long term protection in sewage service. SL-100 may be applied in thickness up to .250 inch in a single pass. SL-200 is able to withstand high solid slurries as well as service generating high levels of H₂S. The balance in polymerization allows resistance to slug treatments with caustics and allows the product to maintain film integrity in the presence of high levels of aqueous acids	Concrete	trowel putty knife
Eco-Crete Lite Request Data sheets / MSDS Light weight, easy to use repair concrete for vertical and overhead surfaces	Eco-Crete Lite is 100% solids three component, easy to use repair compound for vertical and overhead areas. Eco-Crete Lite may be applied to repair walls, or overhead areas where damaged concrete exists. 100% Solids, No VOC”S. Stronger than concrete. Long term protection, No sagging or slumping	Concrete	trowel putty knife
Eco-Crete 911 Request Data sheets / MSDS Emergence concrete Repair "Drive-Over" in 10 to 15 minutes	Eco-Crete 911 is a rapid set, high strength ultra low viscosity Polyurea repair material. Great for concrete repair. This is a two part, 1:1 systems 98% solids and designed for rebuilding and repairing broken control joints and spalled concrete surfaces very quickly. Cures from -20F to 130F Traffic area spills & crack repairs. Floor repairs. Shallow spills on bridge decks.
Industrial COATINGS:
“ Simplify Your Repair and Industrial Coating Projects with Proven Practical Solutions” This innovative, safe multi-functional new generation of polymer technology will remarkable simplify, your most demanding repair & coating projects, on wet or Dry surfaces, even underwater.
	Corrosion is an ongoing concern and issue in so many industries, and for good reason. Inadequate protection will not only set you back with repair down-time, but it can also lead to more disastrous safety-related consequences and liability. Whether the cause of corrosion is natural or manmade-chemical in nature, the EcoPolymer industrial coatings from Construction Systems Supply offer complete protection while keeping the environment safe.

Product	Description/Typical Application	Surface Material	Application Tools	Service .Temperature.
SC-1100 Request Data sheets / MSDS Concrete primer	SC-1100 is a 100% solids low viscosity Novolac deep penetrating primer designed for sealing concrete. Its slow cure rate makes it ideal for warm weather applications. Mixes very easily with sand to make a very strong repair material.	concrete	roller brush spray	dry service 250 ºF immersion 140 ºF
SP-2000R Request Data sheets / MSDS Excellent chemical resistance and immersion service Adheres to wet surfaces	SP-2000R is an economical multi-fictional and higher performing novolac epoxies. SP-2000R is a safe 100% solids, no VOC's coating. This product is ideal for concrete or metal in aqueous service due to its resistance to salt and brackish water, sewage, mineral acids, and alkaline's. The 'R' represents a rubber additive that provides additional impact resistance and bridges micro-cracks. Typical applications include wastewater (tanks, lift stations, wet wells, and manholes), cooling towers, and more. SP-2000R can also be used as an interior or exterior pipe lining or coating. Available in a paste grade .	concrete metal	roller brush spray	dry service 212 ºF immersion 150 ºF
SP-2000W Request Data sheets / MSDS 100% solids NO VOC's NSF/ANSI 61 CERTIFIED FOR DRINKING WATER Excellent immersion resistance's	SP-2000W is NSF/ANSI 61 CERTIFIED FOR DRINKING WATER. Its certified for commercial hot and cold water tanks. Where ever potable water is stored or piped SP-2000 is the coating to use. It contains no volatile organic compounds or solvents, it may be safely applied in confined area with good ventilation.	concrete metal	roller brush spray	dry service 250 ºF immersion 170 ºF
SC-2100 Request Data sheets / MSDS Top coating	SC-2100 is an economical Novolac coating primarily designed for use as a high performance top coat in floor applications. Its durability and wear resistance also make it suitable for slurry operations.	concrete	roller brush spray	dry service 250 ºF immersion 140 ºF
SC-3100 Request Data sheets / MSDS containment & high wear coating	SC-3100 is an excellent coating for floors and secondary containment areas. This ceramic filled coating offers durability in high traffic areas and provides excellent resistance to. many diverse chemical agents. This product is available in a flame retardant formula for the semiconductor industry.	concrete metal	roller brush spray	dry service 300 ºF immersion 200 ºF
SC-3000M Request Data sheets / MSDS high slip & abrasion resistance surface coating	SC-3000M is a tough, ceramic and UHMW filled novolac coating with excellent wear and abrasion resistance The high slip surface make it ideal for chutes, slurry tanks, and truck beds.	concrete metal	roller brush spray	dry service 240 ºF immersion 200 ºF
SC-3000Y Request Data sheets / MSDS high slip & abrasion resistance surface coating	SC-3000Y is .an excellent Novolac coating that provides better abrasion and wear. resistance than our SC-3100. The high ceramic solids content of SC-3000Y makes it suitable for applications such as slurry tanks, floors and FGD scrubbers.	concrete metal	roller brush spray
SC 3300 Request Data sheets / MSDS Highly chemically resistance tank liner.	SC-3300 is a high cross-link density, ceramic-filled Novolac coating designed to provide superior, long term chemical resistance in immersion service. The solids content and morphology make SC-3300 an excellent tank liner.	concrete metal	roller brush spray	3300 an excellent tank liner.
SC-5400 Request Data sheets / MSDS High temperature, Severe chemical service	SC-5400 is a high temperature version of SC-3000Y. SC-5400 offers superior chemical resistance as well as wear and abrasion resistance, SC-5400 is ideal for ducts (including FGD), wet scrubbers, secondary containment, steel / concrete tanks and process vessels that require a coating to withstand elevated temperatures and severe chemical service.	concrete metal	roller brush spray	dry service 450 ºF immersion 300 ºF
SC 3406 Request Data sheets / MSDS High temperature Severe chemical service	SC-3406 is a 100% solids, specialized Novolac coating designed to withstand multiple, rapid temperature variations. SC-3406 provides excellent chemical and heat resistance; Will withstand temperatures in excess of 400°F. SC-3406 is outstanding for pipe wraps, leaks, scrubbers, crackers, stacks, primary and secondary containment, valves, fittings, fans blowers, compressors, ducts, chemical line, brine / slurry tanks and more Can withstand multiple, rapid temperature variations up to 400°F Excellent chemical and heat resistance	concrete metal	roller brush spray	dry service 450 ºF immersion 300 ºF
Thurmalox 260 Request Data sheets / MSDS Anti-corrosive Applicable directly to hot metal surfaces up to 500ºF	Thurmalox 260 series coatings ate air drying, self-priming, heath and corrosion resistant coatings based on a silicone copolymer resin and a highly effective corrosion inhibitive pigment system. Thurmalox 260 series coatings are designed for application directly to hot metal surfaces up to 500ºF on operating equipment, providing tough chemical resistance and color stability.	metal	Spray	dry service 500ºF
Eco Floor COATINGS:
High Performance Floor Coatings providing a high wear resistance and a full range of chemical full range of chemical resistance.
	Chemical resistance to sewage, alkalis, brine water, diesel and acids assures durable anti-corrosive protection to critical system surfaces. EcoPolymer coated surfaces can be ready for use before most other repair methods. While times will vary with temperature, coatings applied in full aqueous immersion can cure in just days. Cementitious applications can take up to 28 days before achieving full functionality. EcoPolymer is also capable of filling micro-fractures found in concrete, repairing the damaged surface.
Product	Description/Typical Application	Surface Material	Application Tools	Service .Temperature.
SC-1100 Concrete primer	SC-1100- A 100% solids low viscosity Novolac deep penetrating primer designed for sealing concrete. Its slow cure rate makes it ideal for warm weather applications. Mixes very easily with sand to make a very strong repair material.	concrete metal	roller brush spray
Eco-Floor 1500. Request Data sheets / MSDS	Eco-Floor 1500 – A fast set, safe and easy to apply hybrid Novolac industrial epoxy floor coating system with good UV stability. Eco-Floor is 100% solid with very good impact resistance, great wear, excellent compressive strength, tensile and elongation. Excellent for kitchens, supermarkets, show rooms and more. Available in clear and gray.	concrete metal	roller brush spray
Eco-Floor 3100. Request Data sheets / MSDS	Eco Eco-Floor 3100 Floor 3100 - A durable, ceramic tough coating designed for floor use where chemical resistance is a must. Ideal choice for aircraft hanger floors.	concrete metal	roller brush spray
Eco-Floor 2000r. Request Data sheets / MSDS	Eco Eco-Floor 2000R Floor 2000R - A high solids coating for industrial floors in harsh environments. The “R” represents a rubber additive that provides additional impact resistance and bridges micro-cracks. May be applied to damp surfaces and provides excellent protection from alkalis, sewage and other diluted mineral acids.	concrete metal	roller brush spray

Elastomeric Products
100% Solids .elastomeric. industrial containment and maintenance coatings for metal, concrete and asphalt surfaces. .
	These two-part polyurethane, flexible epoxy, and urethane/acrylic coatings provide superior performance in waterproofing, potable and wastewater containment, liquid/chemical containment, roofing and decks, and structural metal and industrial equipment protection.
Product	Description/Typical Application	Surface Material	Application Tools	Service .Temperature.
ER-100 Request Data sheets / MSDS Trowel able Elastomeric joint sealant 100% Solids No VOC’s	ER-100 is a Trowel able Elastomer designed for applications requiring high elongation in moderate environments. ER-100 Is a two component elastomer which is designed to handle moisture, mildly acidic or mildly alkaline environments. ER-100 will provide an excellent level of protection for expansion joints, cracks in concrete, in heaving soils, sealing joints and cracks, and against freeze thaw dynamics. The UV stability of ER-100 will allow many years of service. ER-100 should not be used in high wear areas, as the high elongation is more suited to Moderate and light wear applications. •Excellent impact resistance and corrosion protection	concrete metal	roller brush squeegee	dry service 200 ºF immersion 150 ºF
ER-2000 Request Data sheets / MSDS Elastomeric coating applied to both asphalt and concrete secondary containment Sealant for secondary containment	ER-2000 100% Solids .Elastomeric. Industrial Maintenance Coating for Metal and Concrete Substrates. ER-2000 is a versatile, .elastomeric. coating and joint compound that can be used as: • Sealant for secondary containment and other structures • Crack-bridging base coat for other coatings • Pourable joint compound for expansion joints or large stress cracks • Topcoat on substrates subject to cracking, high vibration or other movement ER-2000 offers respectable chemical resistance and good UV stability. ER-2000 has outstanding adhesion, can be applied to a wide variety of surfaces and tolerates less than ideal surface conditions. ER-2000 can be applied to both asphalt and concrete secondary containment structures.	concrete metal asphalt	roller brush squeegee	dry service 200 ºF immersion 150 ºF
Ultra-Flex Request Data sheets / MSDS coating applied to both asphalt and concrete secondary containment potable water	ULTRA-FLEX™ two-part polyurethane, flexible epoxy, and urethane/acrylic coatings provide superior performance in waterproofing, potable and wastewater containment, liquid/chemical containment, roofing and decks, and structural metal and industrial equipment protection. A class-A fire-rated, urethane coating is now also available. can be applied to both asphalt and concrete secondary containment structures.	concrete metal asphalt	roller brush squeegee	Continues service 140º F
Industrial Repair and Wear Compounds
Machinable high-performance and wear compounds for rebuilding and replacing metal and concrete substrates
	Machinable Grade “MG” is a 100% solids two component, high performance engineered paste grade material for machine shop and field use to repair and rebuild equipment. It is ideal for refitting bearing housings, key ways; machining end bells, shaft journals and repairing tanks or cracked blocks. MG technology consists of hybrid Novolac resins with specialty blended atomized and strengthening engineered ingredients.
Product	Description/Typical Application	Surface Material	Application Tools	Service .Temperature.
EC-306 Request Data sheets / MSDS Machinable grade High temperate	EC-306 is a synthetic rebuild material for metal parts and surfaces, and is machinable It has a smooth spread able consistency which makes it easy to apply. EC-306 is most often used in steel tank repair but is also well suited to rebuilding tube sheets, shafts, bearing housings, etc.	metal	trowel putty knife	dry service 490 º F immersion 194 º F
EC-310 Request Data sheets / MSDS	EC-310 is a rugged ceramic filled repair / wear compound for severe environments. EC-310 offers superior abrasion resistance and tolerates less than optimal conditions. EC-310 can cure in very low temperatures as well. EC-310 has several product variations:	metal	Paste: trowel putty knife Liquid: roller brush spray	dry service 360 ºF immersion 240 ºF
EC-330 Request Data sheets / MSDS	EC-330 is a ceramic and UHMW filled compound. The addition of UHMW provides a high slip surface and increased impact resistance. Applications include chutes, transition areas, loader buckets, dump beds and hoppers.	concrete metal	trowel putty knife	dry service 240 ºF immersion 200 ºF
SC-5400 Request Data sheets / MSDS 100% Solids, no VOC Excellent Chemical resistance � Maximum heat resistance �	SC-5400 is a 100% solids Novolac coating designed for maximum heat and chemical resistance. Excellent coating for floors, secondary containment, ducts, piping, vessels and storage tanks. Withstands up to 98% sulfuric acid, 100% phosphoric acid, 35% nitric acid, and 100% hydrofluoric acid, MEK, mineral acids, bleach, chlorides, potassium, and sodium. SC-5400 is a true high performance coating liquid. PASTE OR LIQUID	concrete metal	Paste: trowel putty knife Liquid: roller brush spray	Dry Service 450 ºF (232 ºC) Spill / Splash 360 ºF (182 ºC) Immersion Service 300 ºF (149 ºC)

Moisture-Cure Coating Index
	Description	Uses
Primers
MC-Zinc	Single component, zinc-rich primer, with surface tolerance. Approved for Class B Slip Coefficient.	Versatile, easy to use, corrosion resistant primer. Replaces epoxy zincs. Better performance than inorganic zincs.
MC-MIOZine	Industries first MIO*/zinc filled primer. All of the corrosion resistance of the best zincs, with surface tolerance better than epoxy mastics.	Full or spot primer on hand and power tool cleaned surfaces. Replaces epoxy and inorganic zincs and epoxy mastics.
MC-Prep-Bond	Low viscosity, penetrating sealer to replace epoxy penetrating sealers.	Use as a universal primer on hand tool cleaned surfaces.


Intermediate
MC-Ferrox B	MIO* filled urethane intermediate coating.	Adds performance to any zinc primer when used as an intermediate.
MC-MIOINTERMEDIATE	Canadian trade name for MC-Ferrox B.	Same as MC-Ferrox B.
MC-MIOMASTIC	MIO* urethane mastic overcoat primer with many application and performance advantages compared to epoxy mastics,	Not for direct to metal application. Use MC-Miozinc as spot primer on bare steel. Designed specifically for over- coating old coatings including lead based coatings.
MC-CR	Red oxide and white Intermediate coat.	Universal intermediate coat over MC- Zinc or MC-Miozinc to replace epoxy intermediates. Use white MC-CR when top coating with white MC-Luster or MCShieldcoat.

TOP COATS
MC-FERROX A	MIO* modified, aliphatic topcoat. Limited to .10w gloss environmental colors. Longer life than 2-component urethanes, more resistant to checking and peeling.	Very durable topcoat for offshore marine, and industrial applications. MID” modification greatly extends coating life and allows easy over coating years later.
MC-MIOTOPCOAT	Canadian trade name for MC-Ferrox A.	Same as MC-Ferrox A.
MC-SHEILDCOAT	High gloss aliphatic topcoat.	Outstanding color retention and chemical resistance for offshore, marine and industrial structures.
MC-BALLAST COAT	Topcoat for ballast tanks and cargo holds.	Use in ballast tanks as a top coat where light color is needed. Can be used over MC- Tar.
MC-LUSTER	Semi-gloss. aliphatic topcoat.	Light stable exterior topcoat for general purpose use.
MC-AROSHIELD	Aromatic gloss topcoat.	Colored topcoat for interior use. Excellent concrete coating.
MC-CLEAR	Aliphatic clear coat.	Chemical and UV resistant clear topcoat for use on specialty projects.
MC-TAR	Super MID” coating. Outperforms coal tar epoxy in every use. Immerse in one hour. Cold weather cure. Replaces all Coal Tar Epoxies.	Use on any marine, offshore. wastewater, hydro or other structure exposed to salt or fresh water or sewage treatment.
MC-ALUMINUM	Aluminum filled urethane. Very durable, abrasion and weather resistant topcoat	Re-coat weathered, galvanized steel, encapsulate rust. Use where high impact is required.

Thinners
MC-THINNER	Solvent reducer specially formulated for all WASSER urethanes.	0% to 25% when needed.
MC-THINNER EX	Biodegradable EPA exempt solvent	Use anywhere exempt solvents are required
MC-THINNER 100	Slow evaporating solvent for WASSER urethanes.	For brush/roll and high temperature application.
PUR-Quik (coating accelerator)	100% solids accelerator, compatible with all WASSER urethanes. Approved for use with MC-CR and MC-Miozinc for potable water.	Dramatically reduces cure time. excellent for cold weather applications.

All coatings are V.O. C. compliant, and maybe applied in cold, damp or high humidity atmospheres and can be immersed after one hour. See individual product data sheets far more in formation. *Micaceaus Iron Oxide.

This latest generation of exceptionally Moisture and Surface Tolerant coatings and repair Systems are used for rebuilding and protecting all types of equipment and structures, concrete or metal on wet or dry surfaces, even underwater.

Typical Applications:

“ Simplify Your Repair and Industrial Coating Projects with Proven Practical Solutions” This innovative, safe multi-functional new generation of polymer technology will remarkable simplify, your most demanding repair & coating projects, on wet or Dry surfaces, even underwater.

High Performance Floor Coatings providing a high wear resistance and a full range of chemical full range of chemical resistance.

100% Solids .elastomeric. industrial containment and maintenance coatings for metal, concrete and asphalt surfaces. .

Machinable high-performance and wear compounds for rebuilding and replacing metal and concrete substrates

“ Simplify Your Repair and Industrial Coating Projects with Proven Practical Solutions”
This innovative, safe multi-functional new generation of polymer technology will remarkable simplify, your most demanding repair & coating projects, on wet or Dry surfaces, even underwater.