Anti-Corrosion Coating

Anti-Corrosive Coatings – Epoxy Coatings – Protective Coatings

anti corrosion coatingThese Eco-Polymer anti-corrosion coating products will tackle your toughest jobs! Engineered for extremely harsh applications, our specially formulated anti corrosive epoxy coating products stand up to severe chemical environments, elevated temperatures, and highly abrasive production areas. Many are 100% approved for potable water. 

Example applications for anti corrosive epoxy coatings:

  • Wastewater management, sewage plants
  • Aqueous environments with chlorinated, salt, and brackish water
  • Secondary containment areas
  • Wet scrubbers
  • Interior/exterior pipe and tank linings/coatings
  • Concrete, steel, ductile iron surfaces
  • Cooling towers
  • Chutes, slurry tanks, and other concrete or metal surfaces with severe abrasive environments

Review the products below, then contact us to request data sheets and specs. Call us at (888) 432-6807 for expert advice to select the epoxy coating that best meets your needs.

Eco-Polymer SP-2000R (liquid and paste)

We designed this 100% solids, no VOCs polymer coating to be a more economical and higher-performing alternative to coal-tar epoxies. This hybrid Novolac anti corrosion coating offers outstanding chemical resistance and excellent adhesion (in excess of 3000 psi). Offers excellent resistance against salt and brackish water, sewage, diluted mineral acids, salts, and alkalis. Ideal for water/waste management including water tanks, wet stations, wet wells, pipes (including concrete and ductile), manholes, lift stations, cooling towers, and basins. Also great for interior and exterior pipe linings or coatings. Available with KevlarR reinforcement and ceramic fill for wear resistance. Excellent adhesion under less-than-ideal conditions such as wet, corroded surfaces. The rubber additive provides good impact resistance and bridges micro-cracks. Adhesion characteristics allow it to bond to steel, concrete, and iron. Available as a liquid or paste (paste grade may be applied underwater). (Eco-Polymer Concrete Primer/Sealer SC-1100 is recommended on concrete surfaces.)

Mfg., distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer SP-2000M (liquid and paste)

This is the most wear-resistant anti corrosion product we offer! Due to its ceramic fill, this high-performance 100% solids hybrid Novolac coating offers outstanding impact resistance, chemical resistance, and long-term wear-resistance for concrete repair and restoration. Types of environments include damp metal or concrete surfaces requiring excellent protection from alkaline, salts, sewage, and diluted mineral acids. Typical applications include water/waste management including water tanks, wet stations, wet wells, pipes (including concrete and ductile), manholes, lift stations, cooling towers, and basins. SP-2000M has been engineered for areas with severe abrasion resistance with less than 24 mgs lost on ASTM-D-4060 tests. Its long-term wear resistance makes it ideal for chutes, slurry tanks, and other concrete or metal surfaces with severe abrasive environments. Available as a liquid or paste (paste grade may be applied underwater).

Mfg., distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection

Eco-Polymer SP-2000W NSF

NSF/ANSI 61 certified for drinking water, this epoxy coating is ideal for commercial hot and cold water tanks, pipes, and storage tanks. Because it is 100% approved for potable water, this is the coating to use if you need to store or pipe drinking water in steel, concrete, or ductile iron. Applications include pipe coating, tank coating, and tank repair. Engineered with 100% solids, it contains no volatile organic compounds (VOCs) or solvents and may be safely applied in confined areas.

Mfg., distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings

Eco-Polymer SC-3300 (liquid and paste)

Offering a high cross-link density and ceramic-filled Novolac coating, Eco-Polymer SC-3300 provides superior, long-term chemical resistance in immersion service. The solids content and morphology make this industrial-strength polymer an excellent tank liner. This 100% solids sprayable industrial maintenance coating is ideal for concrete and metal surfaces such as pipe and tank coatings, secondary containment areas, and other areas where high chemical resistance is a must. Stands up to 98% sulphuric acid. Available as a liquid or paste. Dry service temperatures to 300 degrees F.

Mfg., distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer SC-5400 (liquid and paste)

A higher temperature version of SC-3300, this “industrial strength” epoxy coating offers superior chemical resistance as well as wear and abrasion resistance. Applications include ducts (including FGD), wet scrubbers, secondary containment, steel/concrete tanks, process vessels, and other concrete and metal surfaces requiring an anti corrosion coating to withstand elevated temperatures and severe chemical service. Dry service temperatures as high as 450 degrees F. Available as a paste or liquid.

Mfg., distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer Rust Converter

This high-grade, two-part epoxy features anti-corrosion resistance fillers and can be used in any environment as an anti-rust protective coating. Apply over manually prepared surfaces to provide a primer or apply as a top coat for corroded areas where blasting is not allowed. Eco-Polymer Rust Converter can be easily applied by brush or roller to achieve a 4-10 mils dry film thickness. This 100% solids two-part epoxy, non-flammable, anti-corrosion resistant material is perfect for marine applications, piers, pipes, etc. The non-flammable characteristic enhances safety during the application process.

Mfg., distributed and sold exclusively by Construction Systems Supply.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings

Ultra-Flex 5000 (liquid and paste)

Waterproof and seal your entire floor with this elastomeric product, an ideal industrial containment and maintenance coating for metal, concrete, and asphalt surfaces. This ecologically friendly formula is a liquid, two-component, asphaltic polyurethane containing reclaimed polymers, carbon black, anti-oxidants, UV stabilizers, and anti-ozonates from recycled tires. Ultra-Flex 5000 cures to form a waterproof membrane that will adhere to steel, wood, concrete, OSB, ICF, and most construction surfaces. This versatile, self-leveling material flows with the contour of an applied substrate and bridges cracks up to 1/8 inch. UV and hydrolytically stable, Ultra-Flex 5000 will not degrade or become brittle over time or from exposure to harsh climates. Excellent elongation properties allow for contraction and expansion. Available as a liquid or paste. Ideal for a wide variety of industrial applications including chemical tanks, waste water, and potable water containment.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings

Ultra-Flex 6800

This high-gloss, heat-resistant, and chemical-resistant elastomeric product is engineered from a two-component polyurethane. Ultra-Flex 6800 is UV stable and will not dull or discolor in direct sunlight. Highly abrasion resistant, Ultra-Flex 6800 adheres to wood, masonry, concrete, and metal. With color additives, this product provides an excellent, highly resistant overcoat on Ultra-Flex 5000.

Good for: Anti-corrosive Coatings, Epoxy Protective Coatings

Our Eco-Polymer protective coatings offer excellent corrosive resistance. Our 100% solids epoxy coatings are non-flammable – an important benefit in industrial environments – unlike other rust blockers, which produce fumes that can ignite. Whatever protective coating you choose, remember to always follow manufacturer specifications for properly mixing and storing industrial epoxy resins.