Epoxy Coatings for Concrete Protection

concrete protection These Eco-Polymer 100% solids hybrid Novolac coatings offer outstanding chemical resistance and excellent adhesion (in excess of 3000 psi). These epoxy products provide great impact resistance and bridge microfractures in concrete. Many are available with Kevlar reinforcement and ceramic for increased wear resistance.

The following Eco-Polymer epoxies provide outstanding chemical resistance and adhesion on wet, corroded surfaces as well as low-temperature application and cure environments. Effective against salts, alkalies, sewage, and dilute mineral acids, these solutions are ideal for concrete and metal in aqueous service in water/waste management and may be applied underwater.

Example applications:

Dams and spillways
Water towers, cooling towers, and basins
Water tanks, wet stations, wet wells
Pipes (including concrete and ductile)
Interior and exterior pipe linings or coatings
Manholes
Lift stations
Water, wastewater, and sewage treatment facilities
Airport runways

Review the products below, then contact us to request data sheets and specs. Call us at (888) 858-3790 for expert advice to select the product that best meets your needs.

Eco-Polymer SP-2000R (liquid and paste)

We designed this 100% solids, no VOCs polymer coating to be a more economical and higher-performing alternative to coal-tar epoxies. This hybrid Novolac coating offers outstanding chemical resistance and excellent adhesion (in excess of 3000 psi). Offers excellent resistance against salt and brackish water, sewage, diluted mineral acids, salts, and alkalis. Ideal for water/waste management including water tanks, wet stations, wet wells, pipes (including concrete and ductile), manholes, lift stations, cooling towers, and basins. Also great for interior and exterior pipe linings or coatings. Available with KevlarR reinforcement and ceramic fill for wear resistance. Excellent adhesion under less-than-ideal conditions such as wet, corroded surfaces. The rubber additive provides good impact resistance and bridges micro-cracks. Adhesion characteristics allow it to bond to steel, concrete, and iron. Available as a liquid or paste (paste grade may be applied underwater). (Eco-Polymer Concrete Primer/Sealer SC-1100 is recommended on concrete surfaces.)

Good for: Anti-corrosive Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer SP-2000M (liquid and paste)

This is the most wear-resistant product we offer! Due to its ceramic fill, this high-performance 100% solids hybrid Novolac coating offers outstanding impact resistance, chemical resistance, and long-term wear-resistance for concrete repair and restoration. Types of environments include damp metal or concrete surfaces requiring excellent protection from alkaline, salts, sewage, and diluted mineral acids. Typical applications include water/waste management including water tanks, wet stations, wet wells, pipes (including concrete and ductile), manholes, lift stations, cooling towers, and basins. SP-2000M has been engineered for areas with severe abrasion resistance with less than 24 mgs lost on ASTM-D-4060 tests. Its long-term wear resistance makes it ideal for chutes, slurry tanks, and other concrete or metal surfaces with severe abrasive environments. Available as a liquid or paste (paste grade may be applied underwater).

Good for: Anti-corrosive Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection

Eco-Polymer SC-3300 (liquid and paste)

Offering a high cross-link density and ceramic-filled Novolac coating, Eco-Polymer SC-3300 provides superior, long-term chemical resistance in immersion service. The solids content and morphology make this industrial-strength polymer an excellent tank liner. This 100% solids sprayable industrial maintenance coating is ideal for concrete and metal surfaces such as pipe and tank coatings, secondary containment areas, and other areas where high chemical resistance is a must. Stands up to 98% sulphuric acid. Available as a liquid or paste. Dry service temperatures to 300 degrees F.

Good for: Anti-corrosive Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer SC-5400 (liquid and paste)

A higher temperature version of SC-3300, this “industrial strength” epoxy coating offers superior chemical resistance as well as wear and abrasion resistance. Applications include ducts (including FGD), wet scrubbers, secondary containment, steel/concrete tanks, process vessels, and other concrete and metal surfaces requiring a coating to withstand elevated temperatures and severe chemical service. Dry service temperatures as high as 450 degrees F. Available as a paste or liquid.

Good for: Anti-corrosive Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings, Industrial Equipment Coating and Repair Epoxies

Eco-Polymer Concrete Primer/Sealer SC-1100

Designed to seal concrete, this 100% solids low-viscosity Novolac primer strikes deep into the concrete! This primer mixes easily with sand to form a very strong repair material. Its slow cure rate makes it ideal for warm-weather applications. (Ask about our cold-weather varieties.) Plus, it may be applied to green concrete as young as seven days.

Good for: Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings

Crystal Lok® Concrete Waterproofing & Sealing

This water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Use Crystal Lok on concrete in any location where the seepage is not caused by cracking or other structural flaws.

Good for: Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings

FlexCoat Coating System

Engineered as ultra strong, flexible, and fast cure, our premium polyurethane system permits up to 1200% movement to bridge over cracks and joints and can be filled with various aggregates. Flexcoat bonds to concrete, metal, and wood and can be applied at any thickness from 40 mils to several inches. This superior skid-free membrane is ideal for patios, walkways, garages, boat decks, kennels, and many other applications.

Good for: Epoxy Coatings for Concrete Protection

FlexSeal Waterproofing Membrane

This affordable hybrid waterproofing membrane offers excellent adhesion properties for positive side applications. FlexSeal Waterproofing Membrane is formulated to be flexible and tough, which minimizes puncture damages and maximizes crack-bridging features.