Concrete Repair Solutions
The following Eco-Polymer epoxies and primer/sealers provide outstanding chemical resistance and adhesion for horizontal and vertical structural and non-structural repairs. These products also offer excellent adhesion on wet, corroded surfaces (both metal and concrete) as well as low-temperature application and cure environments.
Example applications:
- Dams and spillways
- Water towers, cooling towers, and basins
- Water tanks, wet stations, wet wells
- Pipes (including concrete and ductile)
- Interior and exterior pipe linings or coatings
- Manholes and lift stations
- Water, wastewater, and sewage treatment facilities
- Airport runways
Review the products below, then contact us to request data sheets and specs. Call us at (888) 858-3790 for expert advice to select the product that best meets your needs.
Polyurethane Foam Grouts, SB-1500 Line and SB-1600 Line
Our water-activated, water-stop-foams expand up to 40 times. Use these water-stop-foams and injection sealants to stop gushing water; fill voids, hairline cracks, and joints; and use for soil stabilization. Accelerator adjustable gel time. Grades from rigid to very flexible. NSF approved.
Good for: Concrete Repair Solutions
Eco-Crete 451
We formulated this corrosion-resistant and chemical-resistant polymer specifically for field repairs of damaged concrete and metal in severe service such as airport runways, high-impact areas, and underwater dam spillways. Excellent for concrete and metal repair, this unique polymer compound is designed to be applied to wet or dry concrete or metal surfaces and incorporates Kevlar® reinforcement to withstand severe impact. An impact-resistant, fast-cure polymer, Eco-Crete 451 features strength of >15,000 psi (ASTM D 695) and cures quickly on horizontal applications. Available in pre-measured kits, this polymer is easy to mix and apply for concrete crack repairs.
Good for: Concrete Repair Solutions
Eco-Crete Lite
You can apply this easy-to-use, three-component system to repair damage on vertical walls or overhead areas, whether the surfaces are concrete or metal. Eco-Crete Lite incorporates an aggregate in conjunction with Eco-Prime SC-1100, which allows Eco-Crete Lite to strike into the substrate, providing excellent adhesion. Unlike conventional concrete patches, Eco-Crete Lite is extremely lightweight (perfect to trowel on overhead surfaces) and will not break loose from the surrounding concrete. In concrete wall repair and overhead applications, this polymer will not sag or slump. With a strength of > 6500 psi, Eco-Crete Lite is much stronger than normal concrete. Available in pre-measured kits, it’s easy to mix and apply.
Eco-Crete Lite is applied to repair corrosion on this concrete tank in a water-treatment facility.
Good for: Concrete Repair Solutions
Polyurethane Resin, SB-1400 Line
This flexible sealant – with super low viscosity – is formulated for wet and dry surfaces and moving cracks. Our polyurethane resins offer superior penetration in hairline crack injection and create a dense and flexible seal. Catalyst adjustable.
Good for: Concrete Repair Solutions
Flexgel2 Polyurethane Flexible Foam Gel
With up to 1200% elongation, this premium single-component hydrophilic curtain/bladder injection gel gives you 8 gallons from 27 ounces. Single-component and multi-ratio pumps. NSF drinking water contact approved.
Good for: Concrete Repair Solutions
Can-Seal-Foam and Dispenser Gun
Our polyurethane foam sealant/filler in a can offers closed-cell hydrophobic foam for countless applications.
Good for: Concrete Repair Solutions
Quickseal Epoxy, 4000 Line
Strong and flexible, this 100% solids high-strength epoxy resin is ideal for structural repairs. Use as an epoxy putty for surface repairs, crack patching, and surface port adhesive. Surface and injection applications. The Epoxy Cartridge System includes handheld guns, resin, and paste cartridges.
Good for: Concrete Repair Solutions
Quickfix Polyurea, 6000 Line
Our Quickfix products offer fast and permanent crack, spall, and joint repair in addition to high-moisture tolerance and fast, low-temperature curing. Vertical and UV-resistant aliphatic formulations available. Available in bulk and cartridge systems. 10- to 15-minute drive-over time. Coal temperature cure from -20 degrees F to 130 degrees F. Available as Ultra Thin or Paste formula. Request our Professional Grade for warehouse flooring and high-traffic areas.
Good for: Concrete Repair Solutions
Polyacrylate Gel, 2000 Line
This hydrophilic poly-acrylate gel is ideal for soil stabilization, curtain/grid-injection, and to seal pores in grout and block.
Good for: Concrete Repair Solutions
Asphalt Repair
No need to mobilize large crews and equipment, Aquaphalt is simply poured into the area to be repaired, leveled with a rake or trowel, sprinkled with water and compacted with a hand-tamper or roller.
- Remove all loose debris and sweep clean the area to be patched.
- Place material in hole and level with a rake or shovel. Ensure that the material stands above the existing surface to allow for compaction. If the depth of the area to be patched is greater than 2.5 inches, place material in two layers.
- Soak material evenly with water; 1 quart of water per container is recommended. Excess water will not damage the material!
- Compact to a smooth finish with a hand-tamper or roller.
Even when the blacktop is wet - even when it's raining - the asphalt can be patched, with Aquaphalt!
*Note—Since Aquaphalt binds and cures with water, it should be stored in its sealed container until just prior to use to prevent it from reacting with ambient moisture.
Good for: Concrete Repair Solutions
