Industrial Floor Coatings & Commercial Floor Coatings
Built on the Novolac technology, our Eco-Floor products are 100% solids and formulated with a rubber additive, which provides outstanding impact resistance and wear resistance. Ideal for a wide variety of concrete and metal surfaces, these high-performance industrial and commercial epoxy floor coatings can be applied to damp surfaces and are resistant to gasoline, sewage, alkalis, and other corrosive substances. Several of our Eco-Floor products are FDA-approved for food-handling areas.
Example applications:
- Service bays, garage floors, automotive show rooms, and airplane hangars
- Supermarkets, food service areas, food processing plants
- Warehouses
- Breweries
- Tank liners (for solutions up to 98% sulphuric acid)
- All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts
Review the products below, then contact us to request data sheets and specs. Call us at (888) 858-3790 for expert advice to select the product that best meets your needs.
Eco-Polymer SC-5400 (liquid and paste)
A higher temperature version of SC-3300, this “industrial strength” epoxy coating offers superior chemical resistance as well as wear and abrasion resistance. Applications include ducts (including FGD), wet scrubbers, secondary containment, steel/concrete tanks, process vessels, and other concrete and metal surfaces requiring a coating to withstand elevated temperatures and severe chemical service. Dry service temperatures as high as 450 degrees F. Available as a paste or liquid.
Good for: Anti-corrosive Epoxy Protective Coatings, Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings, Industrial Equipment Coating and Repair Epoxies
Eco-Polymer Concrete Primer/Sealer SC-1100
Designed to seal concrete, this 100% solids low-viscosity Novolac primer strikes deep into the concrete! This primer mixes easily with sand to form a very strong repair material. Its slow cure rate makes it ideal for warm-weather applications. (Ask about our cold-weather varieties.) Plus, it may be applied to green concrete as young as seven days.
Good for: Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings
Crystal Lok® Concrete Waterproofing & Sealing
This water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Use Crystal Lok on concrete in any location where the seepage is not caused by cracking or other structural flaws.
Good for: Epoxy Coatings for Concrete Protection, Industrial and Commercial Epoxy Floor Coatings
Eco-Floor 1500
An economical, fast-set hybrid epoxy floor coating with good UV stability, this 100% solids polymer offers great impact and wear resistance and excellent compressive strength, tensile, and elongation. Eco-Floor 1500 is ideal for concrete floor coatings for kitchens, food processing plants, showrooms, supermarkets, garages, airplane hangars, and more. The clear option is an excellent topcoat for stained concrete. FDA-approved for food-handling areas.
Good for: Industrial and Commercial Epoxy Floor Coatings
Eco-Floor 1500 Non-Shrink Grout
This economical, non-shrink, concrete grout bonds more effectively than cementitious grout. Eco-Floor 1500 Non-Shrink Grout is the perfect product for concrete floor repair to ensure it is uniform in color, seal, and wear resistance. Excellent for concrete patching, mix with sand and epoxy to repair concrete spalls, then coat with 10 mils of Eco-Floor 1500 to extend the service life of the floor. The mixed material can be applied by pouring directly into a crevice, or pour it over the damage area and spread with a squeegee. Minimum adhesion is 2850 psi (concrete failure, no delamination). Compressive strength is 9440 psi.
Good for: Industrial and Commercial Epoxy Floor Coatings
Eco-Floor 2000R
This high-solids epoxy coating for industrial floors is ideal for harsh environments such as wastewater/sewage facilities, industrial floors with high traffic areas, shop floors that must withstand heavy equipment (such as forklifts), and even breweries! Eco-Floor 2000R is formulated with a rubber additive, which provides additional impact resistance and bridges micro-cracks. May be applied to damp surfaces and provides excellent protection from alkalis, sewage, and other diluted mineral acids. This “industrial strength” polymer offers excellent impact and chemical resistance for concrete and metal surfaces.
Good for: Industrial and Commercial Epoxy Floor Coatings
Eco-Floor 3300
A durable, tough, ceramic coating, Eco-Floor 3300 is engineered for concrete and metal floors requiring superior long-term chemical resistance such as aircraft hangars, service garage floors, driveways, and automotive show rooms. Resistant to gasoline, jet fuel, diesel fuel, and other petroleum products, Eco-Floor 3300 is the ideal choice for harsh industrial floor environments, chemical environments, and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.
Good for: Industrial and Commercial Epoxy Floor Coatings
